Preac Blades and Belts

Blades used for the Proxxon FET tilting arbor table saw.  They can also be used on the Proxxon FKS/E tilting arbor table saw and the Microlux tilting arbor table saw.  The same blades are used on the Preac table saw that is no longer being made.  They are 2 1/4” in diameter with a  5/8 inch hole and will work with the standard Preac adapter bushing.  To use these blades with the Proxxon or Microlux saw,  an adapter bushing that we manufacture is required.


2 1/4” x .028" - 60 tooth standard blade.                    2 1/4” x .020" - 132 tooth blade for fine work             Adapter bushing for blades on Proxxon FET $6.00

      

The 60 tooth .028” blade is the standard we supply with the Proxxon FET and was the standard supplied with the Preac.  A .032” blade and a .064” blade are also available for cutting 1/32”  or 1/16” dados and rabbets.  The .020” thick 132 tooth blade is also available for veneer and very fine work.  All the blades cost $15.00 each.


Belts for the Preac are also kept in stock.  Belt price is $14.00.


CLICK BELOW TO LINK TO ANOTHER PAGE IN THIS SITE

Home   About  Shows/Classes  Chairs  Tables    Cases/Chests  Desks   Shelves  Sewing/Spinning   Beds/Cradles

Picture Frames  Boxes  Kitchen Tools Garden Tools Hearth Tools Woodworking Tools  Wind Vanes  Firkins/Buckets

 Hand Tools          Proxxon Table Saw      Taig Lathe        Mill/Overhead Shaper        Preac Blades   

© Peter G. Boorum 2018        smallife@myfairpoint.net