|
Ports
are custom machined from solid brass stock. Each port has a Plexiglas window which is held in place with a pressed sleeve.
A six hole bolt pattern is standard. Hex head hardware for mounting may be ordered.
The outside and inside diameters must be given with the order.
The smaller port in the picture requires a hole diameter of 0.60 inches and will fit Victor Model
Products schooner Mary Ward. ( see links)
| PORT WITHOUT MOUNTING FLANGE |
|
NEW:
Ports without the bolt flange which can be glued in place from the inside surface. The port
shown has an O.D. of 5/8 inch and mounts in a 1/2 inch hole.
Please
call or email for a quote with your requirements.
CLEATS
Cleats can be made
in brass in various sizes and are hand finished. Size and mounting should
be given in the quote.
See price list for
basic size configurations.
Call or email with
your requirements.
| CLEAT P/N: 06312CLEAT |
|
NEW:
A new cleat which can be used on smaller boats. The cleat shown is
5/8 inch long, and is 1/8 inch wide. The holes are 1/32 inch with 0.150 spacing.
This cleat is P/N: 06312CLEAT and is priced at $4.50 each.
Back to Home Page
|
